Générateur docker-compose wg-easy

# wg-easy v15 - generated on vpnsmith.com/en/tools/wg-easy-compose-generator
# Host: vpn.example.com - WireGuard port: 51820/udp - panel: https://wg.example.com

volumes:
  etc_wireguard:
  caddy_data:
  caddy_config:

services:
  wg-easy:
    image: ghcr.io/wg-easy/wg-easy:15
    container_name: wg-easy
    environment:
      - PORT=80
      - TRUSTED_PROXIES=10.42.42.43,fdcc:ad94:bacf:61a3::2b
      - INIT_ENABLED=true
      - INIT_USERNAME=admin
      - INIT_PASSWORD=GENERATE-A-PASSWORD
      - INIT_HOST=vpn.example.com
      - INIT_PORT=51820
      - INIT_DNS=1.1.1.1,9.9.9.9
    networks:
      wg:
        ipv4_address: 10.42.42.42
        ipv6_address: fdcc:ad94:bacf:61a3::2a
    volumes:
      - etc_wireguard:/etc/wireguard
      - /lib/modules:/lib/modules:ro
    ports:
      - "51820:51820/udp"   # WireGuard: the only port clients need
    restart: unless-stopped
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
    sysctls:
      - net.ipv4.ip_forward=1
      - net.ipv4.conf.all.src_valid_mark=1
      - net.ipv6.conf.all.disable_ipv6=0
      - net.ipv6.conf.all.forwarding=1
      - net.ipv6.conf.default.forwarding=1

  caddy:
    image: caddy:2-alpine
    container_name: caddy
    ports:
      - "80:80/tcp"
      - "443:443/tcp"
      - "443:443/udp"
    networks:
      wg:
        ipv4_address: 10.42.42.43
        ipv6_address: fdcc:ad94:bacf:61a3::2b
    volumes:
      - ./Caddyfile:/etc/caddy/Caddyfile:ro
      - caddy_data:/data
      - caddy_config:/config
    restart: unless-stopped

networks:
  wg:
    driver: bridge
    enable_ipv6: true
    ipam:
      driver: default
      config:
        - subnet: 10.42.42.0/24
        - subnet: fdcc:ad94:bacf:61a3::/64

wg.example.com {
	reverse_proxy wg-easy:80
}

# 1. Pare-feu : SSH d'abord, puis le port WireGuard
sudo ufw allow OpenSSH
sudo ufw allow 51820/udp
sudo ufw allow 80/tcp
sudo ufw allow 443/tcp
sudo ufw allow 443/udp
sudo ufw enable
# Attention : les ports publiés par Docker contournent ufw. Ouvrez/fermez-les aussi dans le pare-feu de l'hébergeur.

# 2. Créez le dossier et collez le ou les fichiers générés
sudo mkdir -p /etc/docker/containers/wg-easy
cd /etc/docker/containers/wg-easy
sudo nano docker-compose.yml
sudo nano Caddyfile

# 3. Démarrez wg-easy
sudo docker compose up -d
# Suivez les journaux (Ctrl+C pour quitter)
sudo docker compose logs -f wg-easy

# 4. Ouvrez le panneau: https://wg.example.com

# 5. Une fois connecté, retirez les lignes INIT_* et relancez docker compose up -d